Do clean these things from time to time. Being made of rubber, you can easily rinse them with car wash soap and lukewarm water. It takes no more than a minute. Well, it just looks neat. Also, accumulated dirt might mess up as it can enter between your bumper and the protector. There are three extremely crucial things you should always remember when using a bumper protector. You should hang the guard above them. Driving with them is a really, really bad idea!
Important note 3: Check your local legislation. In some states parking with your license plate covered might be illegal. A nut about anything related to wild trails, cars and crazy fun. Sharp tongue, soft soul. My wife always says I need to trim my beard because I look like a hermit. Disclaimer Privacy Policy. Bumper guards can be a polarizing topic.
Bumper Bully vs Bumper Badger: 3 main differences. Differences between standard and premium version. Two included straps hook into the trunk, like most mat-style guards, but the Luv-Tap also offer two extra points of attachment which hug the sides of the vehicle using four large suction cups. This extra security means that a motorist can drive with the product installed, and not worry about it flapping around in the wind.
The guard measures 11 inches tall, and up to inches wide, easily covering the entire rear of most vehicles. The Luv-Tap can be bought with or without a license plate window, and a corresponding model which wraps fully around a front bumper is also available.
These simple stick-on rubber pads can be applied be applied in a matter of minutes at all corners of the vehicles, as four of them come in a pack. They could, however, be used to augment some bumper guard products which only protect the middle. Each pad measures two by 20 inches, and sticks to the body with standard 3M adhesive.
You'll have to put it back in the trunk before embarking, as the two-strap installation is not intended to hold it in place at high speed. The product is made from rigid rubberized plastic similar in composition to an all-weather floor mat, and offers about the same level of protection. A center section of the guard can also be cut out with a razor blade to prevent a bumper-mounted license plate from being covered up.
The BumpShox guard screws into the front bumper in place of a normal license plate frame, making installation a breeze, and giving it a very factory look. The product is fully made from rigid, yet flexible, polyurethane foam which can sit in the heat and take some bumps while maintaining its shape. The BumpShox measures out to 14 inches wide, 7.
The design is also not intended to fit most rear bumpers. This is another strapped bumper mat, but with a few extra features added on. Most welcome are the red and gold reflectors, making the matte black surface much easier to spot in the night hours.
The Bumper Bully is also made from a soft latex compound that the manufacturer promises is gentle on paint. The included fabric straps are reinforced with steel threading to prevent fraying or cutting, but they still recommend placing the guard in the trunk while driving. Like the BumperBadger, measurements max out at 46x12 inches, but the shape is unique. The Platinum Edition comes standard with high visibility 3M reflectors, steel reinforced straps and additional 10mm thick cushion impact pads for extra impact absorption and protection.
Our car bumper protector has unique features that makes it different from other bumper guards and bumper protectors on the market. As an added benefit, our bumper guard integrates dual reflectors for safer night time parking. The best feature of our car bumper guard is its unique shape and design. As a car enthusiast our rear bumper protector was crafted to complement the graceful lines of high end European cars.
The wider top portion gives maximum protection, while the tucked in lower part will not block the exhaust pipes You should never block the vehicles exhaust. No other bumper protector gives you all these benefits. Its a temporary parking guard for the rear bumper that can be used for indoor NYC parking garages, outdoor parking garages, valet parking garages and outdoor applications, such as street parking.
Each year millions of dollars are spent fixing bumpers, most of which are damaged in parking garages and street parking. Safety reflectors also help your car stand out in the dark, which further helps to reduce the potential damage of a dent to your fender.
When it comes to securing the guard in place, the straps are reasonably bulky; they can also cause problems for some cars with trunk stoppers, as they cannot be re-positioned. This means that although the guard is big enough for most vehicles, it may not fit specific builds.
As the name suggests, it is literally the all-black edition, and comes in at the lower end of the budget. This bumper guard can be folded down when not in use, making it easy to ferry around in the trunk.
It has tough straps that help to reduce the chance of slippage, and is crafted from PVC-free rubber, which keeps it malleable yet resistant to tearing or permanent indentations.
This is a surprise given that the straps feature steel wiring to prevent breakages. One of the most crucial factors for an accessory exposed to the elements is for it to be waterproof, which this guard is not. It also shares the most common complaint among guards of not protecting your bumper corners. The Gold Edition Bumper Bully Extreme is an outdoor bumper guard that provides protection to your rear bumper only, without any corner coverage.
In price terms, it's about mid-range, though there are some premium touches that improve the quality and value for money offered by this product. The materials used in the making of this bumper guard include premium grade rubber, which helps the guard to maintain its shape, both in typical use and after a bump. Despite its low price, the bumper guard holds its shape well with no sagging, helped in part by the straps that are steel-reinforced.
0コメント